1、Slurry mixing tank
The slurry mixing tank is used for slurry mixing before the operation of the single-cell flotation machine, suspending the ore pellets and fully contacting and mixing with the chemicals, so as to create conditions for the sorting operation, and it can also be used as a pre-desilication tank in the production of alumina. , post-dissolution trough, de-washing tank and seeding trough. It can also be used for similar operations in other industrial productions.
Stirred tanks are used for slurry mixing and storage, not only for concentrators, but also for other industrial production sectors. When black, non-ferrous metal concentrate slurry and coal slurry are pipelined. Large mixing tanks are also required.
3、Lifting agitation tank
The stirring tank has both stirring effect and lifting effect. The lifting height can reach 1.2m. In the equipment configuration, the height difference of slurry self-flow is insufficient. Or if the difference is less or not suitable for pumping, this equipment can be used.
4、Drug mixing tank
The chemical mixing tank is used for the preparation of various agents in the flotation plant. Due to the different properties of the chemicals, the material and structure of the tanks for the single tank flotation machine are also different.
At present, there are no stereotypes for special acid and alkali chemical tanks. The slurry tank is the most widely used and the most widely used. Depending on the nature of the material being stirred and the degree of suspension required, there are slight differences in its structure. For example, a single-impeller, non-recycling cylinder structure is generally used for agitation with minimum and medium suspensions, and the rotation speed of the impeller is low; the highest degree of suspension stirring The structure of the recirculating cylinder or multiple impellers is required, and the rotation speed of the impeller is high. The structural characteristics of the high-concentration stirring tank are that the diameter of the impeller and the diameter of the recirculating cylinder must be increased.